Yaesu [FT2DR] APRS beaconing

[FT2DR] APRS beaconing

Just joined this group yesterday and I need some assistance with making the FT2DR beacon properly on APRS.  I plan on using this radio to track my progress as I hike in the mountains and send the info to the APRS system if possible. 

I've been trying to set the parameters to make this radio send a beacon but so far it doesn't seem to be doing so.  I am receiving APRS messages and such and they display on the screen but I cannot get it to smart beacon or manually beacon for some reason. 

I have set my GPS parameters for a fixed station and I've

Yaesu FT2DR UI bugs fixes firmware

[FT2DR] I couldn't see that any UI bugs were fixed in this release or features added

Here are the issues I reported 5 months ago, and their status after the new firmware updates were installed last night. Disappointed that nothing was fixed:

This one is very annoying - probably the most annoying of all. Even though APRS is set to mute, the audio of the transmitted status beacon comes through the speaker. It can be controlled with the volume control, but doing so lowers the volume of the Band A frequency. So essentially, if I want to quietly monitor my local repeater, I have to deal with listening to an annoying packet from the FT2DR that I should not have to hear. Others have commented on this as well. This has been confirmed and reported to the engineers for study.

No change. Audio of the transmitted beacon comes through the speaker at the level that the volume control is set to.

Yaesu FT-2DR Issues

I have had issues with the FT-2DR locking up when taking pictures with the camera mic.  After I take a couple the radio locks up and has to be turned off then back on and the pictures are lost.  Just another bug in the Fusion system that they hopefully will get to one of these days.

Carl,KB1EJH

Thanks, that is part of my problem, although it appears to be more than that. I started to make a long dissertation on the problem, but now that I know there is at least one more person aware, I'll keep it brief.

1. Picture display per page 108 of the manual doesn't work.

2. Selecting between pictures when you have two or more stored doesn't work. Up/down arrows don't work, tapping a log entry may take more than 30 seconds to respond. TOP may or may not work.

3. DEL doesn't work or works strangely (tap DEL, then select entry to delete).

4. As you described, cycling power will lose the pictures, but in my case, it filled the log entry with blank entries. Deleting one (which may be difficult) will delete all of them.

Similar issues occur with text messages.

I imagine all their software guys are working on fixing WIRES-X, but hopefully they'll be able to address some of the Fusion radio issues soon.

73, Randy - K5MW

YAESU FT2DR GPS Log Function

Has anybody tried to use the GPS Log function. If so what mapping program did you use to look at the track log. If you had to convert the file how did you convert it.

YAESU FT2DR Battery drain when FT2 is off?

Anyone noticed that the battery drains when the FT2 is OFF? I have charged my radio twice in the CD41 charger, removed it from the charger and the next day the battery is dead.

I have stepped through the menu and the only thing I see running in the background is the clock. GPS was turned on so I turned it off but wouldn't think it would run when the radio is off.

Any ideas?

Answer : 

My experience over the past two months is the same as Bill's.  I am very pleased with the power consumption.

Charging the HT  with the stock supplied charger allows me to scan the four local Fusion repeaters, 18 hours a day for three FULL days before needing an overnight recharge.  If I leave the radio powered off, no significant drain occurs.

That's significantly better than the old FT1D THAT my friends have, whose GPS gobbles power.

I suspect there may be a problem with your non-standard charger/battery combination.

FTB2D is a memory management program for the FT2DR/E handheld

YAESU FT2D [FT2DR] Yaesu programming software when is Yaesu going to have CPS programming software for the FT2DR

You can try the program for 2 weeks to check that it works on your equipment but you cannot write to the radio until it is registered.

Backup/restore of the FT2D clone memory
Modify memories
Add/delete/move memories
Manage memory banks
Cut/copy/paste memories
Sort memories by frequency or name
Analyse and report on duplicate frequencies
Edit Home memories
Edit PMS memories
Edit VFOs
Change the values in the FT2D's menus and APRS/GPS settings
Print memories

Yaesu FT2DR FUSION Single Display Duel Display

Yaesu FT2DR FUSION (FT2DE) Handheld

Yaesu FT2DR FUSION Single Display Duel Display

Hi if you hold

FT-2DR/ DE and Programming-Software

FT-2DR DE and Programming-Software

Does anyone of you know which software will be necessary to configure / programm this radio?